Don't hesitate and lets get started! Contact us for a free inspection on your next home or business mold removal and remediation project.
Call Today At: (503) 461-1006
4949 S. Macadam Ave. #101 Portland, Oregon 97239
Looking for a quality and affordable builder for your next project?
We are happy to meet you during our working hours. Please make an appointment.
We do a thorough investigation and inspection revealing moisture traps.
Rescom Restoration provides mold removal from homes and businesses.
We can return any home to the state it was in before the damage occurred.
Chief Executive
Pure Maintenance is available for same-day and emergency services - we also offer repair services (if required) to help assess and stop any wetness problems contributing to your mold problem.
Our demolition-free dry fog technology has two elements; First, is a sterilant which dissolves the outer membrane of a mold spore on a molecular level (effectively eliminating the mold spores and breaking down the mycotoxins). Second, is a microscopic layer of preventative molecules which draw in mold spores when they re-enter the environment and gets rid of them on contact.
This is a non-invasive, non-toxic, all-inclusive, affordable procedure that takes approximately four to 5 hours for the average 2,000 sq. foot home. We will make sure you are back in your house the very same day.
We are Pure Maintenance Mold Removal Lake Oswego Oregon
Here at Pure Maintenance, we provide water damage mitigation in any situation. The immediate main focus is to find the water intrusion and stop it. Then we look to dry all affected areas and provide mold remediation as needed. Once everything is dry and has been treated, it can be returned to the condition is in before the damage occurred.
“Pure Maintenance was more than mold removal, they understood the need for improving the attic ventilation and provided services above and beyond mold treatment. Jason explained the life cycle of mold and mold spores and his fog treatment is the best!” - Marty F, Vancouver
Don’t hesitate and lets get started! Contact us for a free consultation on your next home or business mold removal and remediation project. (503) 491-1006
Getting Your Home Back – Mold Inspection Options
A mold inspection normally takes several stages to finish. Mold is usually found in damper locations of the house, such as the basement, crawl space or restroom, however it can additionally be found where there is constant moisture. Usually, poor drain, leakage or high humidity triggers mold problems. If you start to smell a musty odor, or you otherwise suspect you have a mold problem, getting a mold inspection done might be your very first line of defense to make sure both the security of your family however even that more damage is not done to the house. A mold inspection will figure out exactly where the mold is, what type of mold it is, and additionally the causes and potential solutions to the issue.
Usually, a property owner has a number of choices when it comes to mold inspection and tests. There are a number of tester kits out there that you can look for at either home renovation stores or on the internet. Nevertheless, these do not usually provide the sort of report that you might be needing when confronted with a mold problem. There will be numerous questions that you have, which can usually basically only be explained by somebody professionally trained to handle mold and mold specific problems. Getting an inspection done by a specialist will not only assure you that the tests are done properly, however additionally, give you the explanations you need to be able to have a comprehensive inspection and additionally learn what your choices might be.
You can additionally have a mold inspection included in a regular house inspection. Make sure though that the person doing the inspection is accredited to do those sort of inspections because not all house inspectors are, and this is information you will have to verify yourself. If you only prefer a mold inspection done, it is usually best to opt for somebody who is accredited and highly knowledgeable in the field.
Understand that mold does require moisture to develop and to grow. During the inspection you will find that the inspector examines not only the problem locations that would promote mold growth however will additionally inspect the structure for leakage, any drain problems, air quality and humidity levels. This will be added to samples of visible mold, and the inspector will have the various tools required to search for and inspect mold that might be hiding itself in duct work and behind walls.
Once the inspection has been done, the inspector will show you the results and talk about the report with you. Any questions you might have, you need to ask at this time. Inspectors will usually help you to recognize the causes of the mold in your house and how it is best to go about removing the mold itself, however additionally repairing the causes. The prepared report will share with you all of the approaches that have been used in the place of the mold, determining the cause, and what suggestions they might have for you in dealing with it.
Mold and air quality testing is necessary to those buying new homes. Even for owners of old homes it is important to find these things because they might lead to health problems for inhabitants.
Mold Testing Services – When To Work with One?
Mold testing is important due to the fact that each individual’s response to different strains of mold depend on both the person and the length of time that they are subjected. In a lot of cases, mold is harmless and does not damage your health or your house. However, some types of mold can be dangerous or highly hazardous when they happen in your home. Mold can cause allergies in some individuals with symptoms ranging from skin irritation, problem breathing and mental state swings. Some people are more prone than others; those who are most at risk from alarmingly hazardous mold are the very young, the very old and people with weakened immune systems.
Homeowners ought to not postpone with mold testing due to the fact that, if mold takes hold in your home and triggers damage, you might discover that your house loses some of the value that you have been striving to create. Of the over 100,000 types of mold, a significant percentage have been recognized as highly hazardous to people. In addition, depending upon the degree of your issue, mold removal can be quite pricey and, unfortunately, not all insurance plans will cover the cost of the removal of mold. The costs likewise depend upon whether the mold assaults the base of your house including the walls, floors, ceilings and roofing. Undoubtedly, if you need to pull down wallpaper and drywall or change your hardwood floor covering, you’re going to have a more pricey job than if you merely need to change your soaked carpet. To preserve the value of your house, have your house evaluated for mold and take suitable actions. This will additionally help to preserve the health and wellness of both your family and yourself. For these reasons and more, it is always in your best interests to retain a mold testing provider if you suspect you have a mold issue. If you are thinking about selling your house, this is particularly critical considering that if a prospective purchaser discovers mold during the escrow mandated evaluations, mold removal can postpone or nullify the sale.
Mold testing experts have been trained to inspect and evaluate the air and the structure of your house to see if mold exists. If the mold testing expert discovers that mold is, in fact, present in your house, his next job is to identify exactly what type of mold it is and at what concentration it exists in your atmosphere. Next, the expert must identify the mold’s precise area and probable source. Your house can only be validated as devoid of mold if all mold is eliminated and given that mold is generally triggered by excessive wetness, the source of this wetness should be discovered. Whether the source is as basic as a high level of humidity in the house in general or as complex as an unseen leakage that is enabling excessive wetness to enter your house, locating the source of the wetness is the key to keeping your house mold free in the future.
After your mold testing is done, a reliable mold removal organization will provide a number of options for how to proceed if they discover that you have mold. To establish a removal prepare for your house, the mold expert must have enough information to identify both the type of mold you are experiencing along with the scale of its concentration. The type of mold will identify what treatments will need to be followed for treating it and the concentration will identify safety measures and the timeframe for complete removal. Also, depending upon the size of the issue, a little section of the floor covering or wall-board can be cut and dealt with while a larger area may call for specific equipment or a more extensive procedure to prevent more contamination.
Mold can be a harmful and unwelcome guest in your home. Because of this alone, it is advisable to contact a mold testing specialty business as soon as you can when you suspect mold has plagued your house. Not only will a specialist test your house for the presence of mold, they can encourage you on the procedures you ought to take to eliminate it if it is discovered.found.
Specialist Mold Removal
Mold can be a frightening thing, however thankfully, it’s not something that is difficult to manage or remove. Experts understand that mold must have two things to thrive and grow: moisture and humidity. A mold removal expert can visit your house to recognize locations where mold is growing or has formerly grown.
Such specialists can then thoroughly seal your house so that it is fully waterproofed and secured from future mold growth. If necessary and applicable, the mold removal expert might also want to install a crawl space vapor barrier system to protect both your house and your health.
If you suspect mold growth in your basement or other locations of your house, contact a mold removal expert as soon as possible. Keep in mind: a musty-smelling house is an unsafe house. Take the necessary actions to protect your family and your residential or commercial property by purchasing mold removal services today!
Mold removal is necessary to keeping a house and the people in it safe, healthy, and comfortable. Mold, mildew, rot, and dust mites can cause severe health problems, including asthma, allergies, eye and respiratory problems, and a lot more. Mold can also lower a house’s residential or commercial property value and lead to expensive structural damage. Continue reading to find out more about rot and how to manage, remove, and avoid mold growth in your house.
Mold Can Be Tricky and Common
Mold impacts indoor air quality, and, unfortunately, can grow very quickly. In fact, mold can start to grow in a house with humidity over 60% in under 48 hours. Mold can even grow and grow in cold areas, such as a refrigerator, as long as the temperature level is above 40-degrees Fahrenheit. “ Surprise” rot can also secretly grow in fiberglass insulation, and behind wallpaper and drywall. Despite the fact that you might not be able to visibly see the rot, it doesn’t suggest that it’s not there and triggering damage to your house and your health.
Major Results of Mold Development
The presence of mold in a house has numerous negative effects. Individuals can be exposed to rot through direct skin contact, breathing, or ingestion. Mold direct exposure can cause a number of health-related problems, including breathing problems, asthma and topical skin rash. Black mold is rare however highly-toxic and consists of carcinogenic mycotoxins that are connected to certain kinds of cancer, liver and nerve system damage, and more.
Mold can also cause structural damage and destroy the market value of your house– nobody wishes to buy or move into a house with a severe mold problem!
Mold growth can also seriously impact your wallet for two reasons: 1) if left in-tact, mold will continue to grow and end up being significantly costly to remove; and 2) due to a rising number of rot-related lawsuits, numerous house insurance providers now omit mold insurance coverage from property owner policies.
Mold Prevention
A basic yet reliable way to prevent mold growth is to purchase an energy-efficient dehumidifier. Due to the fact that mold enjoys dark, damp, humid areas, it naturally grows in basements and crawl spaces. Investing in a dehumidifier can considerably reduce your house’s humidity levels, making it difficult for mold to grow or thrive.
Traditionally, mold that has reached the inside of walls requires expensive demolition of the entire wall (or walls) to remove. With our proven method of dry fog mold removal, you get 100% sterilized mold at a fraction of the cost compared to other mold removal procedures. In many cases, there will be absolutely zero need for any demolition within the building. Our process leaves you with mold-free air, removes mold spores on contact and puts an end to the spread of mold in your home or office. We offer free re-inspections as well.
View All ServicesWe don’t wait around! Our team starts working immediately to make sure the damage doesn’t spread. If you’re looking for a team that can quickly get your home’s moisture problem under control, give us a call today. We provide same day appointments and free estimates on all the work we do.
View All ServicesWe don’t wait around! Our team starts working immediately to make sure the damage doesn’t spread. If you’re looking for a team that can quickly get your home’s moisture problem under control, give us a call today. We provide same day appointments and free estimates on all the work we do.
View All ServicesDon't hesitate and lets get started! Contact us for a free inspection on your next home or business mold removal and remediation project.
Call Today At: (503) 461-1006
Free visual inspection and assessment:
When you schedule a free visual inspection and assessment with us, we take a look at and examine any visual mold problems in the house. We utilize a wetness meter to examine if any building materials are presently damp. Furthermore, we look in the attic and crawl spaces for any typical situations that add to wetness in properties leading to mold. Moreover, we address any questions and educate our clients on how complicated mold problems can be.
Air screening service call:
This includes 4 air tests. We take 75L samples of air through a cartridge with a calibrated device in various parts of your house. Then, we send out all tests off to be evaluated through a 3rd party lab. We usually get the results within 3-4 days. We can also hurry and have results within 24 hrs for additional cost. Once we receive the results, we email the results straight from the laboratory and review them verbally with the client to decipher the results.
There is a $350 service call cost for the very first 4 tests. We constantly sample outside air to give us a standard of mold levels in the area. We suggest evaluating the attic and crawlspaces, as those locations are out of sight and mind however typically have humidity problems and is normally where mold can take a footing and gradually infect the remainder of the house. Please keep in mind each additional test is $50 and for the typical house 5-8 tests are suggested depending on the size of house and how comprehensive each client wishes to be.
We are focused on sustainable business that delivers the best possible project results.
Don't hesitate and lets get started! Contact us for a free inspection on your next home or business mold removal and remediation project.
Call Today At: (503) 461-1006
Other locations we service near Lake Oswego, Oregon
Yoder, Wilsonville, Willamette, West Linn, Waverly Heights, Viola, Upper Highland, Union Mills, Timber Grove, Sunset